Oracle Audio Delphi MkVI Classic
Oracle Audio Delphi MkVI Classic - Standard MkII power adaptor / None is ordered from manufacturer upon request.
The Delphi MkVI always comes equiped with a pre-cut tonearm board to accommodate almost any 9 or 10 inches tonearms available. Please Check out our Tonearms here.
About the Delphi MkVI Classic
Since 1979, Oracle Audio has been producing state-of-the-art stereo components. Oracle's first turntable, the AC model, introduced new features and technologies to the analog world. Oracle's Delphi MkI was introduced in 1980. The new Delphi MkVI is the sixth edition of the Delphi's line heritage. Through the years the Delphi won numerous prestigious awards and it has been acclaimed worldwide! The Delphi MkVI was awarded the Analog Grand Prix 2010 Gold Award from Japan, more recently Enjoy the Music.com's Best of 2014 Blue Note Award. To this day the Delphi is still Oracle's flagship product and still serves as a reference in the analog community!
Using the finest components and design technologies, the Oracle Delphi MkVI is exquisite in all aspects. Like its predecessors the Delphi MkVI is supported by three suspension pillars to efficiently control unwanted vibrations. It harbors a massive belt-driven platter that uses a center clamp system first introduced by Oracle back in 1979. The Delphi's floating chassis, milled from solid billets of aluminum, is an extremely rigid and inert structure supporting the tonearm and the platter. While the fabrication process of the Delphi is one of minute precision its development process is one of science and emotion; to bring out all of the music's depth and detail. Truly the Delphi MkVI is a work of art!
The Delphi MkVI was launched in late 2009 featuring our new and innovative Micro Vibration Stabilizer System which took its performance level to new heights! Today, summer 2015, we are introducing the Delphi MkVI Second Generation. This latest edition features a two-piece platter assembly which greatly facilitates drive belt installation while also reducing platter resonances. Our drive electronics module was also modified and now harbors a larger power reserve which provides more torque to the motor. Although it is offered as an option, our recently revised Turbo Power Supply MkII exceeds all our expectations! It has a signal that is so stable it outperformed our references! We consider the Turbo Power Supply MkII as a fundamental part of the Delphi MkVI Second Generation.
The new Delphi MkVI Second Generation provides a higher dynamic contrast than ever largely due to its improved transient response resulting in a remarkable ability to preserve the harmonic structure of the music. Driven by our new Turbo Power Supply MkII the Delphi MkVI Second Generation will transform your listening sessions into unforgettable lifelike experiences!
Design & Technology
The global concept of the new Oracle Delphi MkVI, now in its 35th year, was developed around the control of micro vibrations and micro calibration. The micro vibration can be introduced from the inside as well as from the outside. We have to understand that the micro movement of the phono cartridge’s stylus is extremely vulnerable when capturing the minute deviations from the record groove. At the same time this stylus is extremely powerful because it sends through the system a vibrational energy that can and will stimulate other vulnerable components. This will also translate into resonances.
How can it happen?
Resonances generated by the tonearm bearings and the tonearm tube will go back all the way to the stylus and induce a coloration that is in no way related to the music being reproduced. Tonearm bearings play an extremely important role in the quality and integrity of the signal reproduction. Any micro movement within the tonearm bearings will also translate into a mechanical cancellation (two objects moving simultaneously in opposite directions). This means that the stylus will not capture all the micro signals engraved on the vinyl recording.
When we think about the vibrational energy generated from the outside of the record player it is extremely difficult to identify all the sources that can affect the system but it is possible to regroup most of them into 3 categories: electrical, mechanical and acoustical. I will not address the electrical aspect here. For the other two categories the best option would be to completely isolate the player from the sound room in order to protect it against the sound pressure level. As for vibration, the use of an extremely massive platform would help keeping the unwanted mechanical energy outside of the picture. This would not be realistic and certainly not aesthetically successful! The magnetic isolation can be a solution but at the same time it can be a significant part of the problem.
What changes have been made to the drive modules?
The Delphi MkVI is a work of technical development and design aesthetics. As far as the aluminum drive module is concerned we made a cosmetic change to reach the visual balance of the new MkVI. The major change on the circuit with respect to the MkV series was to go from a circuit in fully discrete components to a surface mount configuration. The MkVI Second Generation version was modified to increase the current supply to the motor resulting in a motor torque increase of about 15%. Although minor this upgrade has a significant impact on the sonic performance of the Delphi MkVI Second Generation. We use a low voltage, precise synchronous AC motor on the Delphi MkVI Second Generation.
What is the influence of the bigger sub-chassis on the performance of the MkVI?
The floating sub-chassis of the Delphi MkVI was made larger than its predecessors. By using a larger sub-chassis we have improved the weight distribution simplifying the suspension calibration. The purpose of the counter-weight is to add more mass to the front left suspension tower to more efficiently counter-balance the mass of the tonearm. The coupling of the counter-weight to the floating sub-chassis also contributes in reducing internal sub-chassis resonances. Its positioning, well in sight on the inferior part of the sub-chassis, is a design detail meant to bring the Delphi a more massive look. The central part of the floating sub-chassis was made larger which had for effect to reduce the length of the three legs extending towards the suspension towers. We also increased the rigidity of the tonearm mounting section by widening the tonearm mounting ring support by about 35 percent.
How does the MkVI bearing system differs from the MkV?
The MkVI bearing system maintained the 6 point contact configuration that was developed for the MkV. We are now using a different material for the 6 calibration set screws. The main advantage of the MkVI bearing lies in the fact that the 6 new precision set screws are virtually inert to temperature change. This allows us to calibrate the main bearing system with greater accuracy and closer tolerances. This has a huge and direct impact on the signal reproduction quality of the Delphi MkVI. The MkVI bottom trust plate has been replaced with a polyamide-imide (PAI) high strength plastic with the highest strength and stiffness of any thermoplastic. It has outstanding resistance to wear. The impact of this new trust plate is extremely significant on the sound quality because of its ability to limit the noise generated by the spinning platter. The sonic benefits of the new MkVI bearing system are extremely significant and they are drastically revealed especially when in combination with the micro-vibration stabilizer system (MVSS).
How significant is the Micro Vibration Stabilizer System?
The Micro Vibration Stabilizer System is the single most significant and most efficient improvement made to the Oracle turntable since its creation 35 years ago! The MVSS system represents the final barrier to the elimination of the micro vibrations. This system will virtually eliminate the access of micro vibrations to the most critical part of the turntable, the sub-chassis, tonearm, phono cartridge and platter assembly.
What is the purpose of the MVSS?
The purpose of the MVSS is to capture and dissipate the micro vibrations that are present within the floating sub-chassis without short circuiting the efficiency of the Oracle suspension system. By eliminating the micro vibrations the stylus / platter interaction becomes more accurate, the stylus becomes more stable and better controlled. This increased stability allows the phono cartridge to retrieve more information from the record groove which translates into a more accurate signal reproduction which will not only impact the lower register but the whole spectrum. This global improvement will be very noticeable at all levels: improved musical accuracy, harmonic integrity, transient's sharpness, dynamic contrast, tonal balance, depth of image. The listener suddenly becomes more musically involved and this is a very unique experience!
How does the MVSS system control work?
Beside each suspension tower a small reservoir is secured to the acrylic base of the Delphi. They are filled with an extremely low viscosity silicone fluid. Again, near the suspension housings a threaded stem is mounted to the bottom section of the sub-chassis, those are lining up with the silicone reservoirs, a threaded lock nut and a tapered shape plunger will complete the mechanism. Once the tonearm and cartridge are precisely calibrated, the suspension system perfectly adjusted the turntable is ready to operate. The plungers on each sub-chassis leg are now lining up with the reservoirs mounted to the acrylic base. When in the fully up position the plungers do no come in contact with the silicone fluid in the reservoirs.
It is then possible to play your Oracle without the MVSS in operation. Then experiment with the calibration of the plungers by turning them clockwise when viewing them from above the turntable as reference. Each full turn will generate a plunger displacement of 1,27mm (0,050”). The same calibration should be done for each plunger. Since we are dealing with micro vibrations it is extremely important to lock the plunger in position with the locking ring. Moving the plungers by one turn increments will reveal how they influence the performance. At the factory the best results were achieved between 1½ and 2 full rotations of the plungers. This represents a plunger penetration from 1.90mm à 2.54mm 2,80mm into the silicone fluid. We also believe that the ambient temperature has little influence on the depth calibration of the plungers. The type of support furniture or the nature of the flooring may require some fine tuning of the calibration. The MVSS calibration is done by listening to music so it is in fact a matter of finding the sweet spot where we get the best equilibrium.
What about the new Delrin adjustable feet?
In our quest to further increase the performance level of the new MkVI we did not hesitate to challenge each of the systems we had in place on the Oracle Delphi. Extensive testing and listening test convinced us that the use of Delrin was extremely beneficial to the performance of the turntable. We found the new MkVI Delrin adjustable feet to provide a better sonic balance with all the different equipment racks it has been tested. This new system further improves the natural tones of the instrument and voices. In fact, it is the whole musical spectrum that is gaining from this new system!
Has the power supply been changed at all?
The basic version of the Delphi MkVI comes with a simple and efficient power supply. The Turbo Power Supply MkII is optional but highly recommended as it brings a substantial improvement to the performance level of the Delphi. Its DC power cord is made out of highly performing monofilament thread. What contributes the most to the sonic improvement we get from using the new Turbo Power Supply MkII is the reduction of the parasitic noise (ripple) to less than one millivolt, down from 120 millivolt ripple in the signal of the previous Turbo Power Supply MkI version.
Upgrades Avaliable
Turbo MkII power adaptor.
Clear acrylic dust cover and aluminum hinges. This price only applies when ordered with the Delphi
Full ( Dome style ) Clear acrylic dust cover. This price only applies when ordered with the Delphi This item is shipped in a separate box.