Used - Pair JL audio Dominion D108 Subwoofers
Selling a nice pair of JL Dominion D108 subs. Price is for the pair combined. No manufacturer packaging, will pack carefully and well.
Dynamic Motor Analysis - DMA Optimized Motor
Summary:
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.
Detailed Information:
DMA is a Finite Element Analysis (FEA)-based system, meaning that it takes a large, complex problem, breaks it down into small solution elements for analysis and then assembles the data to form an accurate, "big-picture" solution. DMA's breakthrough is that it actually considers the effects of power through the coil as well as coil/cone position within the framework of a time-domain analysis. This gives us a highly accurate model of a speaker's actual behavior under real power, something that the traditional Thiele-Small models or other low power measurements cannot do. Because DMA does not rely on a steady-state model, it is able to consider shifts in the circuit elements being analyzed. These modeling routines are intense, requiring hours to run for a whole speaker.
DMA is able to analyze the real effects of fluctuating power and excursion upon the magnetic circuit of the motor, specifically the dynamic variations of the "fixed" magnetic field. This delivers intensely valuable information compared to traditional modeling, which assumes that the "fixed" field produced in the air gap by the magnet and the motor plates is unchanging. Analyzing this behavior is critical to understanding the distortion mechanisms of a speaker motor and sheds light on the aspects of motor design that determine truly linear behavior:
1. Linear motor force over the speaker's operational excursion range
2. Consistent motor force with both positive and negative current through the coil
3. Consistent motor force at varying applied power levels
The payoff is reduced distortion, improved transient performance and stellar sound quality.
General Specifications
Enclosure Type: Sealed
Enclosure Finish: Black Ash
Frequency Response (Anechoic): 31 - 112 Hz (±1.5dB)
-3 dB at 29 Hz / 119 Hz
-10 dB at 21 Hz / 143 Hz
Effective Piston Area (Sd): 32.18 sq in / 0.0208 sq m
Effective Displacement: 80 cu in / 1.3 L
Amplifier Power: 500 W RMS short-term
Power Mode: Automatic (Signal-Sensing)
Light Modes: N/A
Signal Processing
Unbalanced Inputs: Stereo or Mono (two RCA jacks)
Balanced Inputs: N/A
Speaker/High-Level Inputs: Stereo or Mono (removeable plug)
Input Grounding: Isolated or Grounded
Input Modes: N/A
Level Control: Variable, from full mute to +15dB over reference gain
Filter Mode(s): Low-Pass
Filter Slope(s): 24 dB/octave
Filter Frequency Range: 25 Hz - 130 Hz
Filter Defeat Function: Yes
Polarity: 0 or 180 degrees
Phase: Variable, 0- 280 degrees, referenced to 80 Hz
Extreme Low Frequency (E.L.F.) Trim: N/A
Line Outputs: N/A
Output to Slave: N/A
Calibration Mode: N/A
Physical specifications
Width (W): 10 in / 254 mm
Height (H): 11.37 in / 289 mm
Depth (D): 13.23 in / 336 mm
Net Weight: 26.4 lb / 12 kg
Note: Height dimensions include feet. Depth dimensions include grilles.